## p11-kit p11-kit — Tool for operating on configured PKCS#11 modules |

## Synopsis

`p11-kit list-modules`

`p11-kit list-tokens ...`

`p11-kit list-objects ...`

`p11-kit import-object ...`

`p11-kit export-object ...`

`p11-kit delete-object ...`

`p11-kit generate-keypair ...`

`p11-kit list-profiles ...`

`p11-kit add-profile ...`

`p11-kit delete-profile ...`

`p11-kit list-mechanisms ...`

`p11-kit print-config`

`p11-kit extract ...`

`p11-kit server ...`

## Description

p11-kit is a command line tool that can be used to perform operations on PKCS#11 modules configured on the system.

See the various sub commands below. The following global options can be used:

`-v, --verbose` | Run in verbose mode with debug output.
`-q, --quiet` | Run in quiet mode without warning or failure messages.

## List Modules

List system configured PKCS#11 modules.

    $ p11-kit list-modules

The modules, information about them and the tokens present in the PKCS#11 modules will be displayed.

## List Tokens

List all tokens available in system configured PKCS#11 modules.

    $ p11-kit list-tokens pkcs11:token

This retrieves all tokens and displays some of their common attributes.

This subcommand takes the following options:

`--only-uris` | Print only the matching token URIs.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## List Objects

List objects matching given PKCS#11 URI.

    $ p11-kit list-objects pkcs11:object_on_token

This retrieves all objects that match given PKCS#11 URI and displays some of their common attributes. Storage objects also have their PKCS#11 URI displayed.

This subcommand takes the following options:

`--login` | Authenticate to the token before enumerating objects. The PIN value is read from either the `pin-value` attribute in the URI or from the terminal.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## Import Object

Import object into PKCS#11 token.

    $ p11-kit import-object --file=file.pem [--label=label] [--id=object_id] pkcs11:token

Takes either an X.509 certificate or a public key in the form of a PEM file and imports it into the first token matched by given PKCS#11 URI.

The following options are required:

`--file=<file.pem>` | File containing either an X.509 certificate or a public key in PEM format.

This subcommand also accepts the following options:

`--label=<label>` | Assigns label to the imported object.
`--id=<object_id>` | Assigns ID to the imported object. The ID should be specified in hexadecimal format without '0x' prefix.
`--login` | Authenticate to the token before enumerating objects. The PIN value is read from either the `pin-value` attribute in the URI or from the terminal.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## Export Object

Export object matching PKCS#11 URI.

    $ p11-kit export-object pkcs11:object_on_token

Displays PEM formatted contents of the first object matched by given PKCS#11 URI. The matched object has to either be an X.509 certificate or a public key.

This subcommand takes the following options:

`--login` | Authenticate to the token before enumerating objects. The PIN value is read from either the `pin-value` attribute in the URI or from the terminal.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## Delete Object

Delete object matching PKCS#11 URI.

    $ p11-kit delete-object pkcs11:object_on_token

Destroys the first object matched by given PKCS#11 URI.

This subcommand takes the following options:

`--login` | Authenticate to the token before enumerating objects. The PIN value is read from either the `pin-value` attribute in the URI or from the terminal.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## Generate Key-pair

Generate key-pair on a PKCS#11 token.

    $ p11-kit generate-keypair --type=algorithm {--bits=n|--curve=name} [--label=label] [--id=object_id] pkcs11:token

Generate private-public key-pair of given type on the first token matched by given PKCS#11 URI. This command should be used together with --type option and one of --bits or --curve options.

The following options are required:

`--type=<algorithm>` | Specify the type of keys to generate. Supported values are rsa, ecdsa and eddsa.
`--bits=<n>` | Specify the number of bits for the key-pair generation. Cannot be used together with --curve option.
`--curve=<name>` | Specify an elliptic curve for the key-pair generation. Supported values are secp256r1, secp384r1, secp521r1, ed25519 and ed448. Cannot be used together with --bits option.

This subcommand also accepts the following options:

`--label=<label>` | Assigns label to the generated key-pair objects.
`--id=<object_id>` | Assigns ID to the generated key-pair objects. The ID should be specified in hexadecimal format without '0x' prefix.
`--login` | Authenticate to the token before enumerating objects. The PIN value is read from either the `pin-value` attribute in the URI or from the terminal.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## List Profiles

List PKCS#11 profiles supported by the token.

    $ p11-kit list-profiles pkcs11:token

Displays profile IDs of the first token matched by given PKCS#11 URI in human-readable form.

This subcommand takes the following options:

`--login` | Authenticate to the token before enumerating objects. The PIN value is read from either the `pin-value` attribute in the URI or from the terminal.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## Add Profile

Add PKCS#11 profile to a token.

    $ p11-kit add-profile --profile=profile pkcs11:token

Creates new profile object with given profile ID on the first token matched by given PKCS#11 URI. This command fails if the profile ID already exists on the token.

The following options are required:

`--profile=<profile>` | Profile ID to add. Value can either be numerical or textual.

This subcommand also accepts the following options:

`--login` | Authenticate to the token before enumerating objects. The PIN value is read from either the `pin-value` attribute in the URI or from the terminal.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## Delete Profile

Delete PKCS#11 profile from a token.

    $ p11-kit delete-profile --profile=profile pkcs11:token

Destroys all profile objects with given profile ID from the first token matched by given PKCS#11 URI.

The following options are required:

`--profile=<profile>` | Profile ID to delete. Value can either be numerical or textual.

This subcommand also accepts the following options:

`--login` | Authenticate to the token before enumerating objects. The PIN value is read from either the `pin-value` attribute in the URI or from the terminal.
`--provider=<module_path>` | Load only the given PKCS#11 module instead of enumerating modules installed on the system. If `module_path` is a relative path, the module is loaded from the default module path. This path can be determined by running:
    $ pkg-config p11-kit-1 --variable p11_module_path
    /usr/lib64/pkcs11

## List Mechanisms

List PKCS#11 mechanisms supported by the token.

    $ p11-kit list-mechanisms pkcs11:token

This lists all available mechanimsms for a PKCS#11 token

## Print Config

Print merged configuration.

    $ p11-kit print-config

P11-kit provides 3 levels of configuration: system wide, per-module, and per-user. At run-time all 3 levels are merged into a single configuration. This command displays the merged configuration.

## Extract

Extract certificates from configured PKCS#11 modules.

This operation has been moved to a separate command trust extract. See

trust(1)

for more information

## Server

Run a server process that exposes PKCS#11 module remotely.

    $ p11-kit server pkcs11:token1 pkcs11:token2 ...
    $ p11-kit server --provider /path/to/pkcs11-module.so pkcs11:token1 pkcs11:token2 ...

This launches a server that exposes the given PKCS#11 tokens on a local socket. The tokens must belong to the same module. To access the socket, use `p11-kit-client.so` module. The server address and PID are printed as a shell-script snippet which sets the appropriate environment variable: `P11_KIT_SERVER_ADDRESS` and `P11_KIT_SERVER_PID`.

## Extract Trust

Extract standard trust information files.

This operation has been moved to a separate command trust extract-compat. See trust(1) for more information

## Remote

Run a PKCS#11 module remotely.

    $ p11-kit remote /path/to/pkcs11-module.so
    $ p11-kit remote pkcs11:token1 pkcs11:token2 ...

This is not meant to be run directly from a terminal. But rather in a `remote` option in a pkcs11.conf(5) file.

This exposes the given PKCS#11 module or tokens over standard input and output. Those two forms, whether to expose a module or tokens, are mutually exclusive and if the second form is used, the tokens must belong to the same module.

## Bugs

Please send bug reports to either the distribution bug tracker or the upstream bug tracker at https://github.com/p11-glue/p11-kit/issues/.

## See also

pkcs11.conf(5)

Further details available in the p11-kit online documentation at https://p11-glue.github.io/p11-glue/p11-kit/manual/.